A tiny coating delivers two gains in battery tests
A protective film just 5 nanometers thick helped a graphite battery electrode maintain its performance through 4,000 charging cycles in research by South Korea's POSTECH and Sogang University. Under charging conditions of roughly 12 minutes, uncoated graphite lasted fewer than 1,000 cycles.
Contents
- A tiny coating delivers two gains in battery tests
- Why graphite needs protection
- Protecting the powder before making the electrode
- What the one-minute and 12-minute tests measured
- How 4,000 cycles translates into years
- Existing production methods offer a starting point
- Where the researchers see potential uses
- A joint effort with wider materials ambitions
- Key Points
The coated material also stored more than three times as much electricity as uncoated graphite under much faster charging and discharging conditions of about one minute. The two results address a difficult battery problem: getting energy in quickly while keeping the material working through repeated use.
POSTECH announced the development on November 16, 2026. The work was led by chemistry professor Park Soo-jin and mechanical engineering professor Ahn Ji-hwan at POSTECH, alongside professor Ryu Jae-gun of Sogang University's Department of Chemical and Biomolecular Engineering. The findings appeared online in Advanced Functional Materials.
The researchers developed a graphite cathode, the positive electrode, for a dual-ion battery. Their approach applies a technique used in semiconductor manufacturing to individual graphite particles before those particles become an electrode. That change in manufacturing order is central to how the protection works.
Why graphite needs protection
Graphite is inexpensive and widely available. Using it as a cathode material offers an alternative to battery designs that rely on costly metals such as cobalt and nickel in that electrode. The attraction is a material that could support both lower costs and rapid charging.
A dual-ion battery stores positively and negatively charged ions at different electrodes during charging. Positive ions move to the negative electrode, while negative ions, called anions, enter the graphite positive electrode. The electrolyte is the substance through which these ions travel inside the battery.
Graphite consists of thin sheets stacked together. As relatively large anions enter the spaces between those sheets, they push the layers apart. Charging and discharging make the material expand and contract repeatedly. Over many cycles, this movement can crack the structure and reduce the amount of electricity it can store.
High voltage creates another source of damage. Above 4.5 volts, the electrolyte can decompose, leaving deposits that accelerate deterioration. The researchers therefore faced a problem involving both the physical stability of graphite and the behavior of its surroundings during charging.
Protecting the powder before making the electrode
The team used atomic layer deposition, or ALD, to apply zirconium oxide to each graphite particle. ALD builds an extremely thin film through successive reactions at a material's surface. Semiconductor manufacturers use the technique because it allows precise control over coating thickness.
The zirconium oxide film measures 5 nanometers, or five billionths of a meter. The researchers described that as approximately one twenty-thousandth of the thickness of a human hair. Its small size matters because the protective material must leave ions able to reach the graphite.
Earlier approaches applied a protective film to the surface of an already assembled electrode. That could cover other electrode components while leaving graphite deeper within the electrode insufficiently protected. The new approach treats the powder first, so individual graphite particles receive protection before assembly.
The coating helps stabilize the particles as they expand and contract. According to the team, it also supports faster movement of anions into and out of the graphite. The film therefore serves two purposes: limiting structural damage and keeping the routes used to store and release energy accessible.
What the one-minute and 12-minute tests measured
The researchers tested speed and durability under different conditions. In charging and discharging tests lasting about one minute, the coated graphite stored more than three times as much electricity as the uncoated material. This measures how much storage performance the electrode retained when very little time was available for ions to move.
The durability experiment used charging conditions of roughly 12 minutes. The coated graphite maintained its performance through 4,000 repeated charging and discharging cycles, while uncoated graphite reached its limit before 1,000 cycles. Measured by those cycle counts, the coated material endured more than four times as many cycles.
Both results matter because a material can perform well during a quick test yet deteriorate with repeated use. Here, the researchers reported gains in rapid energy storage and in repeated operation, with the coating addressing the graphite damage that had limited durability.
The work remains at the research stage. A commercial launch date, a quantified production cost saving and the exact percentage of capacity remaining after 4,000 cycles were not given. The next tasks include checking coating uniformity during production at scale and verifying reliability over extended operation.
How 4,000 cycles translates into years
Park has suggested that the approach could support about 10 years of use if a battery were charged once a day. The arithmetic helps explain that estimate: 4,000 daily cycles would span approximately 11 years, while 1,000 daily cycles would span about 2.7 years.
Years of service also depend on the conditions a finished battery experiences, including temperature, charging habits and aging while it sits unused. The researchers' result is a measure of repeated charging and discharging under their test conditions; a product's useful lifetime would depend on its complete design and operating environment.
For an owner, better durability could mean more charging sessions before declining storage capacity becomes a practical problem. For equipment used repeatedly each day, the same cycle count could be used up much sooner than in a device charged once daily.
Park Soo-jin, the POSTECH chemistry professor who helped lead the research, described the broader design goal:
"This will serve as a new design principle for making batteries that charge quickly and last long using inexpensive graphite," Park said.
Existing production methods offer a starting point
The manufacturing advantage comes from treating graphite as a powder before electrode production. The coated powder can then enter existing electrode manufacturing processes, giving the researchers a route toward industrial use without changing every later production step.
Production costs will depend on more than the price of graphite. Manufacturers would also need to account for the coating equipment, processing time and consistency of the finished material. Applying the same 5-nanometer protection reliably across large quantities of powder is a central task for commercialization.
Ahn Ji-hwan, the POSTECH mechanical engineering professor involved in the study, said reducing manufacturing expense would be part of the continuing work:
We will continue research to lower production costs.
The team's cost argument brings together two separate opportunities: replacing expensive cathode materials with graphite and making the coated powder compatible with established electrode production. The economic outcome will depend on how efficiently the added coating stage can operate.
Where the researchers see potential uses
Electric vehicles and large energy storage systems are among the applications the team has identified. For vehicles, faster charging and slower deterioration could reduce time spent charging and extend the useful service of a battery.
Storage systems connected to solar and wind generation have a different job. They hold electricity for use when generation falls or demand rises. Materials that tolerate repeated charging could help these systems keep working through many cycles of storing and supplying power.
The researchers also listed power grids, urban air mobility, drones and industrial robots as possible uses. These applications place different demands on batteries: aircraft must carry their energy supply, while stationary storage systems can devote more space to it. Each would require a complete battery designed and tested for its particular job.
The common opportunity is repeated, rapid energy transfer. The research targets the electrode damage that can make this demanding pattern of use difficult, while leaving further engineering work between a promising material and equipment ready for everyday operation.
A joint effort with wider materials ambitions
The POSTECH participants included Kang Ji-eun, Ji Yun-a and doctoral student Cho Seong-eun, working with Park and Ahn. Ryu's team at Sogang University contributed to the joint research.
Support came from the National Research Foundation of Korea, the Ministry of Science and ICT's Core Research Equipment Development Project, the Ministry of Education's Basic Research Program and the Toray Science Foundation of Korea. The project combined battery chemistry with the precise surface processing associated with semiconductor manufacturing.
The researchers have also identified possible extensions to other positive and negative battery electrode materials, fuel cells and catalysts used in water electrolysis. Water electrolysis uses electricity to split water into hydrogen and oxygen. In each case, the proposed direction is to use carefully controlled surface coatings to protect materials while preserving the movement or reactions needed for operation.
The immediate achievement is more specific: coating individual graphite particles improved rapid storage performance and resistance to repeated cycling in a dual-ion battery electrode. Moving that result into production will require the same thin protection to work consistently across much larger quantities of material.
Key Points
- POSTECH and Sogang University researchers coated individual graphite particles with a 5-nanometer zirconium oxide film before making the electrode.
- Under charging and discharging conditions of about one minute, coated graphite stored more than three times as much electricity as uncoated graphite.
- Under charging conditions of roughly 12 minutes, coated graphite maintained performance through 4,000 cycles, compared with fewer than 1,000 for uncoated graphite.
- The coated powder is compatible with existing electrode manufacturing processes, while production uniformity, cost and extended reliability remain development tasks.
- The findings appeared online in Advanced Functional Materials, with potential applications including electric vehicles, energy storage, drones and industrial robots.






